Tim Henson Amp Settings
EQ dial positions, gain structure, and how to replicate the sound on any amp
Reference Amp
Estimated Starting Settings
Dial positions are derived from Henson's tonal fingerprint. These are starting points — fine-tune by ear on your specific amp.
All values on a 0–10 scale. Start here and adjust to room acoustics and your specific amp model.
Choosing the Right Amp
Amp at Every Budget
Getting the Most From Your Amp
- Keep the amp clean and use pedals for drive — the amp's headroom lets the pedals breathe.
- Master volume matters — many classic tones only work at significant volume when tubes are working hard.
Similar Guitarists
FAQ
Tim Henson Amp Settings — Common Questions
Tim Henson's tone is characterised by varies by song with a versatile amp voicing. Approximate starting settings: Gain 5, Bass 5, Mid 6, Treble 6.
Tim Henson's primary amp is the Boss Katana 100 MkII. At different budgets, similar tones can be achieved with: Boss Katana 50 MkII (£200 · Beginner), Boss Katana 50 MkII (£500 · Sweet Spot), Boss Katana 100 MkII (£1,000 · Pro-Level), Marshall DSL40CR (£2,500 · Premium).
Tim Henson's gain structure is varies by song. On a 0–10 scale, this translates to a Gain setting of approximately 5 on most amplifiers.
You can get close to Tim Henson's tone on any amp by focusing on the EQ character rather than specific gain levels. Key: use balanced mids (5–6) as a starting point. Keep the amp clean and drive it with a transparent overdrive pedal. A Boss Katana or Blackstar HT series can approximate the tone at low cost.
For Tim Henson's EQ signature: Bass 5/10, Mid 6/10, Treble 6/10, Presence 6/10. These are starting points — fine-tune by ear to your specific amp and room.