George Benson Amp Settings
EQ dial positions, gain structure, and how to replicate the sound on any amp
Reference Amp
Estimated Starting Settings
Dial positions are derived from George Benson's tonal fingerprint. These are starting points — fine-tune by ear on your specific amp.
All values on a 0–10 scale. Start here and adjust to room acoustics and your specific amp model.
Choosing the Right Amp
Amp at Every Budget
Getting the Most From Your Amp
- Keep the amp clean and use pedals for drive — the amp's headroom lets the pedals breathe.
- Master volume matters — many classic tones only work at significant volume when tubes are working hard.
Related Gear
Similar Guitarists
FAQ
George Benson Amp Settings — Common Questions
George Benson's tone is characterised by clean with full headroom — no amp distortion with a boutique clean amp voicing. Approximate starting settings: Gain 1, Bass 7, Mid 5, Treble 6.
George Benson's primary amp is the Fender Blues Junior IV. At different budgets, similar tones can be achieved with: Boss Katana 50 MkII (£500 · Sweet Spot), Fender Blues Junior IV (£1,000 · Pro-Level), Fender Deluxe Reverb (Reissue) (£2,500 · Premium).
George Benson's gain structure is clean with full headroom — no amp distortion. On a 0–10 scale, this translates to a Gain setting of approximately 1 on most amplifiers.
You can get close to George Benson's tone on any amp by focusing on the EQ character rather than specific gain levels. Key: use balanced mids (5–6) as a starting point. Keep the amp clean and drive it with a transparent overdrive pedal. A Boss Katana or Blackstar HT series can approximate the tone at low cost.
For George Benson's EQ signature: Bass 7/10, Mid 5/10, Treble 6/10, Presence 7/10. The tone is characterised as: smooth-jazz, hollow-body-warmth, octave-playing. These are starting points — fine-tune by ear to your specific amp and room.